Home :: Accessories

New! (GPeR-IP67-Case) GPeR IP67 Case IP68 outdoor enclosure for the GPeR.

Additional information Price: € 4.60 + VAT In stock 20

---

(RBMQS) Mobile Quick Setup If you work with many PoE powered devices and manage their configuration and diagnostics, this small device fits in your pocket will make your life so much easier! The MQS is a tool that lets you manage MikroTik and other devices (including Ethernet-only!) from your smartphone over a Wi-Fi connection!

Additional information Price: € 18.40 + VAT In stock 4

---

(RBGESP) Gigabit Ethernet Surge Protector RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages. Comes with the outdoor case and special grounding cable.

Price: € 10.35 + VAT In stock 20

---

(GPeR) Gigabit Passive Ethernet Repeater The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.

Additional information Price: € 13.79 + VAT Please call +371 67724000 Next supply: 2020-02-23 Notify when available Name: E-mail: Phone:

---

(PL7510Gi) Mikrotik PWR-LINE PRO (19) PWR-LINE PRO (PL7510Gi) is a smart accessory to your existing network for places, where your signal or your cable is unable to reach. Usually data over power-lines would be capped at 100 Mbps, but with PWR-LINE PRO you can reach speed up to 600 Mbps!

Additional information Price: € 46.00 + VAT In stock 3 Next supply: 2020-02-03

---

Wireless USB network adapter TP-Link AC1300 802.11b/g/n/ac

Price: € 26.00 + VAT In stock 1

---

Wireless USB network adapter TP-Link AC600 802.11b/g/n/ac

Price: € 19.00 + VAT In stock 1

---

(MTAO-LTE-5D-SQ) mANT LTE 5o mANT LTE 5o 5dBi LTE antenna with 2 x SMA connectors

Additional information Price: € 14.95 + VAT In stock 20

---

(Woobm-USB) Mikrotik Woobm The Wireless out of band management USB stick (Woobm-USB) is a useful assistant for any network administrator. Simply plug it into any RouterBOARD USB port and it will allow you to access the console of that device over wireless. It sets up as a wireless access point and has a simple web interface where you can access a fully featured terminal interface to configure your router, and where you can configure the Woobm itself.

Additional information Price: € 11.40 + VAT In stock 34

---

(WMK4011) Wall mount kit for RB4011 series The RB4011 wall mount kit is made for protecting your device and it’s ethernet ports from unauthorised access. Made from durable steel, the mount attaches to a wall and allows the ethernet cables to be plugged in, before the router is mounted inside. This means that once the device is secured, there is no easy way to unplug cables, or move the device.

Price: € 9.20 + VAT In stock 10

---

(K-65) Rackmount ears for RB4011 series Rackmount ears for RB4011 series, for installing units in standard rack

Price: € 3.45 + VAT In stock 10

---

(SMASMA) 1m SMA male to SMA male cable 1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables)

Price: € 5.75 + VAT In stock 18

---

(ACGPSA) Active GPS antenna for LtAP mini LTE Kit ACGPSA is standalone active GPS antenna, that works in 1575.4 MHz spectrum. Antenna size is 46.5 mm x 26.5 mm x 12.5 mm with IP67 rating and includes internal magnet and double sided tape, so it can easily be attached to various surfaces.

Additional information Price: € 5.75 + VAT In stock 19

---

(ACSMAUFL) U.fl - SMA female pigtail for wAP R U.fl-SMA female pigtail, that can be used to connect your LTE card to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these pigtails)

Price: € 5.50 + VAT In stock 25

---

(DRP-LTM) DINrail PRO DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.

Price: € 5.75 + VAT In stock 16

---

(LHGmount) Basic pole mount adapter for LHG series, made from metal The LHG mount is a basic pole mount adapter for LHG series products. • Simple and low cost. • Supports all LHG series, products, including LHG XL. • Made from metal. • Package also includes a U-bolt and a K-58 mounting kit.

Price: € 9.89 + VAT In stock 13

---

(QM-X) quickMOUNT-X – additional axis for pole-mounting SXTsq devices Recently we’ve seen a demand for additional pole-mounting options for our popular SXTsq devices. You ask – we deliver! The new QM-X adapter enables vertical and horizontal adjustment on the pole.

Additional information Price: € 2.30 + VAT In stock 55

---

(QM) quickMOUNT The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas.

Additional information Price: € 3.15 + VAT In stock 4

---

(QMP-LHG) quickMOUNT pro LHG The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale.

Additional information Price: € 5.90 + VAT In stock 24

---

(QMP) quickMOUNT PRO advanced wall mount adapter for small point to point and sector antennas The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device or Mikrotiks small mounting clip with weight less than 1.5 kg.

Price: € 5.90 + VAT In stock 21

---

LTE Antenna SMA Omnidirectional With Flexible Joint Black Specification • SMA male screw interface • With flexible joint, rotatable • Frequency range: 791 ~ 960 MHz, 1710 ~ 2170 MHz, 2570 ~ 2620 MHz • Peak gain: 1 ~ 3,5 dBi, 2 ~ 4 dBi, 3 ~ 4 dBi • LTE band 1/2/3/4/7/9/10/13/14/17/20/25 • GSM1800/UMTS • VSWR: 4.0 : 1 max. • Polarization: linear, vertical • Impedance: 50 Ohm • ABS UV resistant • Operating temperature: -10 °C ~o 55 °C • Dimension: with flexible joint 163.10 mm,

Price: € 9.80 + VAT In stock 20

---

(ACOMNIRPSMA) 2.4Ghz 5dbi Dipole Antenna with RPSMA connector 2.4Ghz 5dBi Dipole antennas with RPSMA connectors! Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2x2 MIMO 2.4Ghz AP! By this you can have "2.4Ghz OmniTik", ideal for Outdoor Campus areas, for example, campings or trailer parks. Antennas are waterproof, so you can use BaseBox without top cover if both antennas are properly attached.

Price: € 4.42 + VAT In stock 18

---

(RBGPOE) Mikrotik Gigabit POE injector

Price: € 4.42 + VAT Please call +371 67724000 Notify when available Name: E-mail: Phone:

---

(RBPOE) Mikrotik POE

Price: € 2.43 + VAT In stock 1

---

(5VUSB) Mikrotik 5V USB barošanas konvertieris Additional power injector for USB devices, used with RB/411UAHR and RB/493G. 5V power supply not included!

Price: € 1.66 + VAT In stock 10

---

(ACSWIM) 2.4-5.8 GHz Omnidirectional Swivel Antenna with cable and MMCX connector (for indoor use)

Price: € 7.73 + VAT In stock 4

---

(CA493) Black aluminium indoor

Price: € 17.67 + VAT In stock 1

---

Black aluminium indoor case that fits the RB450 and RB850 series devices

Price: € 11.04 + VAT In stock 5

---

(CA433U) Black aluminium indoor, Fits RB433 series and RBM33G

Price: € 17.67 + VAT In stock 17

---

(SPX-IO19-USB) input/output module for MikroTik RouterBOARD devices SPX-IO19-USB ieeju/izeju modulis paredzēts, lai no MikroTik RouterBOARD iekārtām varētu vadīt divas NO/NC kontaktu ieejas un izejas, kā arī kontrolētu divus NC relejus. Modulis pārvaldāms no RouterOS konsoles un caur RouterOS uztur SNMP/SSH/IPSec.

Price: € 139.00 + VAT Please call +371 67724000 Notify when available Name: E-mail: Phone:

---

Valve Regulated Lead Acid Battery 12V 7.2Ah Pb CSB for extreme temperature environment

Price: € 37.00 + VAT Please call +371 67724000 Notify when available Name: E-mail: Phone:

---

(D-5G-30D3-PA) Precision alignment mount for dish antenna Precision alignment mount for dish antenna

Price: € 38.49 + VAT Please call +371 67724000 Notify when available Name: E-mail: Phone:

---

(ACSMA-U) SMA/ufl pigtail cable

Price: € 4.49 + VAT Please call +371 67724000 Notify when available Name: E-mail: Phone:

---

(mUPS) Mikrotik miniUPS with weatherproof enclosure (EU) The mUPS is a PoE injector with battery backup capability with a 12 V battery connector. It works just like a Gigabit PoE injector, but when power is lost, it switches over to the 12 V battery. Even if your power source is 28 V, the connected RouterBOARD will not reboot when the power source is lost, it will switch over to the 12 V battery transparently. The LEDs indicate DC line or battery usage, the charging of battery and low battery level (<50%).

Additional information Price: € 22.40 + VAT Please call +371 67724000 Notify when available Name: E-mail: Phone:

---

(ACRPSMA) Mikrotik Flex-guide cable (RPSMA to RPSMA 500mm) A super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.

Price: € 6.63 + VAT Please call +371 67724000 Notify when available Name: E-mail: Phone:

---

(RBGPOE-CON-HP) 48 to 24V PoE Converter This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.

Additional information Price: € 19.21 + VAT Please call +371 67724000 Notify when available Name: E-mail: Phone:

---

(CA411-711) Indoor case for routerboards RB/411 RB/411AR RB/411AH CA411-711 is new indoor case for RBM11G, RB411, RB911, RB912 and RB922 series. It has changeable front panels, so you can choose one that fits the product that you actually use. Also, case is higher to accommodate high-power wireless cards and has wall mounting holes on the back.

Price: € 11.04 + VAT Please call +371 67724000 Notify when available Name: E-mail: Phone:

---

ContactPoliciesTechnical SupportProductsTrainingFrequently Asked Questions

Copyright SPX 2010, e-pasts: router@router.lv tālrunis: +371 67724000; fakss: +371 67724001